Bitumen Primer

Home » Acid Resistant » Bitumen Primer

Bitumen Primer

Rate INR/Piece

Whatsapp:

sales@ganeshas.net

Send Email

Product Description

Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer.

Application:

• Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface.
• After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly.
• The drying time will depend upon the temperature.
• 24 Month at the temperature 30°C (+2OC)

Packing:

• Bitumen Primer: 25 Liter Drum

Note:

Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area.
Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building.
Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anticorrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so
to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application.

Product Details:

Grade Standard	Technical Grade
Physical State	Liquid
Color	Black

Characteristics:

Appearance/Color	Pasty liquid/Black
Chemical Base	Bituminous rubber emulsion.
Density	1.0 kg/1
Curing Speed/ Rate Surface dry after	3 – 4 hours
Tack free after	5 – 10 hours
Cured after	2 – 4 days (Dependent on ambient)
Solid Content by Weight	temperature, substrate temperature, relative
Water Content by weight	humidity and thickness of the coating
Bitumen Content by weight	~ 41%
Viscosity	Thixotropic (The viscosity can be adjusted by adding up to max. 5% of clean water. Stir well prior use)
Coating Thickness	For light protection: 1.0 mm min. For greater protection: ~ 1.5 – 2.0 mm applied in two coats.
Water Penetration under Hydrostatic Pressure	48 h, 1 bar: 78.5 cm2: 0 ml 96 h, 4 bar: 78.5 cm2: 33 ml
Service Temperature	-30°C to 200°C
Adhesion	Concrete :Very good, Timber: Very good, Metal: Moderate Glass: Poor